PD8

In-flight delay time

PD8

Command Group: Filling	Access:	Network interfaces:
	RW	CANopen	SDO2200sub08
		MODbus	230E,2
PD8 - In-flight delay time after fine valve has been shut off. Range: 0..65535.		PROFIbus	read 6,8 write 6,136

Synopsis:
	Command	Response
Get	PD8	P8:<Value>
Set	PD8 <Value>	OK (or ERR)

Valid for	Min. value	Max. value
141.184	0	65535
142.184	0	65535
143.184	0	65535
151.184	0	65535
151.186	0	65535
152.184	0	65535
64.184	0	65535
78.184	0	65535
88.184	0	65535

PD8 In-flight delay time after fine valve shuts off.
After the fine valve shuts off, a weight peak may occur because of a surge or splash of the product being filled.
This delay parameter allows the weight to settle before the end measurement is taken.
Range: 0 ... 65535 msec..