NA

Network Address

NA

Command Group: Communication

Access:

Network interfaces:

RW

CANopen

MODbus

2078,2

NA - Assign Network Address

PROFIbus

Synopsis:
CommandResponse
GetNAA:<Value>
SetNA <Value>OK (or ERR)
Valid forMin. valueMax. value
141.181    
141.184    
141.185    
141.186    
143.181    
143.184    
143.185    
151.181    
152.181    
162.181    
179.181    
181.181    
64.181    
64.184    


NA Set or Display Networking Address

This command displays or Sets a Network Address. The actual address format depends on the network interface in the referenced position.
Issuing the command without any parameters returns the current network value.
Set a new value by issuing the NA command followed by the desired address, in the format used for this network.

Examples:
NAShow current address
NA 5Set address to Addr = 5
NA '192.168.11.90' Set ethernet address to 192.168.11.90