FD

Factory default

FD

Command Group: Calibration

Access:

Network interfaces:

TAC protected

W

CANopen

SDO2006sub02

MODbus

2066,1,8000

FD - Load factory default

PROFIbus

write 8,0

Synopsis:
CommandResponse
SetFDOK (or ERR)
Valid forMin. valueMax. value
141.181    
141.184    
141.185    
141.186    
142.181    
142.184    
142.185    
142.186    
143.181    
143.184    
143.185    
151.181    
151.184    
151.186    
152.181    
152.184    
162.181    
179.181    
181.181    
64.181    
64.184    
68.181    
68.183    
69.181    
72.181    
72.184    
78.183    
78.184    
88.183    
88.184    
88.185    


FD Factory default settings – this command put the LDU back to a known state. The data will be written to the EEPROM and the TAC will be incremented by 1. 

NOTE : All calibration and setup information will be lost by issuing this command . The command returns
ERR and has no updating action unless it is preceded by the CE XXXXXXXXXX is the current TAC. command, where