S3

Setpoint 3

S3

Command Group: Setpoints	Access:	Network interfaces:
	RW	CANopen	SDO2600sub04
		MODbus	206C,2 select 2067,1,3
S3 - Set the setpoint 3 value		PROFIbus	read 29,$33 write 29,$63

Synopsis:
	Command	Response
Get	S3	S3:<Value>
Set	S3 <Value>	OK (or ERR)

Valid for	Min. value	Max. value
151.181	-999999	999999
152.181	-999999	999999
64.181	-999999	999999
72.181	-99999	99999
88.183	-262143	262143

S3 Set the setpoint for channel 3. This is the trigger level that causes action of the output channel relay, according to the settings of the controls A3, H3 and P3.
Issuing the S3 command without any parameters returns the current value in the form S3:+00001.

See also A0, A1, A2, A3, S0, S1, S2, H0, H1, H2, H3, P1, P2, P3.