Command Group: Setpoints
206C,2 select 2067,1,0
S0 - Set the setpoint 0 value
read 29,$30 write 29,$60
S0 Set the setpoint for channel 0.
This is the trigger level that causes action of the output channel relay, according to the settings of the controls A0 and H0.
Issuing the S0 command without any parameters returns the current value in the form S0:+00001.
See also A0, A1, A2, A3, S1, S2, S3, H0, H1, H2, H3, P1, P2, P3.