PD7

In-flight correction

PD7

Command Group: Filling	Access:	Network interfaces:
	RW	CANopen
		MODbus
PD7 - Correction factor for in-flight value in percent. Range: 0..50.		PROFIbus

Synopsis:
	Command	Response
Get	PD7	P7:<Value>
Set	PD7 <Value>	OK (or ERR)

Valid for	Min. value	Max. value
72.184	0	50

PD7 Correction factor for the in-flight value in percent. Range: 0 … 50 %.
When a filling cycle has completed then the Actual weight result are compared against the desired fill weight (PD4). The In-Flight Value (PD10) are then corrected with PD7% of the difference.