A3

Sp 3 Source

A3

Command Group: Setpoints	Access:	Network interfaces:
	RW	CANopen	SDO2800sub04
		MODbus	2068,2 select 2067,1,3
A3 - Select Gross/net source for setpoint 3		PROFIbus	read 29,$13 write 29,$43

Synopsis:
	Command	Response
Get	A3	A3:<Value>
Set	A3 <Value>	OK (or ERR)

Valid for	Min. value	Max. value
151.181	0	2
152.181	0	2
64.181	0	2
72.181	0	8
88.183	0	1

A3 Set the source for setpoint channel 3. This source will trigger the required action of the output channel relay, according to the settings of the controls S3, H3 and P3.
Issuing the A3 command without any parameters returns the current value in the form A3:+00001.

0 = Gross weight as setpiont source.
1 = Net weight as setpoint source.
2 = Average.

Example: If you want the Setpoint to be trigged on the Net weight, set the value to 1.

NB! Special values for DAS72 (A1, A2, A3)
00 - Gross Weight.
01 - Net Weight.
02 - Peak.
03 - Average.
04 - Hold.
05 - Peak to Peak.
06 - Valley.
07 - Error.
08+ - OFF.

See also A0, A1, A2, S0, S1, S2, S3, H0, H1, H2, H3, P1, P2, P3.